Welcome, visitor! [ Register | LoginRSS Feed

Can't find what you are looking for? Post a request for an offcut directly on our site. If you need any help contact us on +353 (0)51-358144 and ask for our metal offcut department

How to buy How to sell How to request


Metaloffcut.com is a new exchange designed to help you buy and sell metal offcuts.  

We developed Metaloffcut.com because we believe that both individuals and Businesses should have the facility to :

  • Sell your valuable metal off cuts for far more than you would get from a scrap merchant [Sell Offcut]
  • Buy the size of metal off cut required (according to requirements), instead of having to purchase excess material because of the sheet size restrictions dictated by the steel mills and stockists [Request an Offcut ]
Until now, for many sub contract engineering businesses across Europe there were only two options available to companies to manage spare offcuts;
  • Sell to a scrap Merchant for a fraction of its value  ( see sample below )
  • Hold the offcut in-stock, on the off chance a similar requirement will arise in the future.

Experience has shown that invariably stock ends up being kept over the long-term and ultimately sold for scrap. That’s costly – take a look at the table below;

Table 1 Price Comparison  ( indicative rates only )
Material Type 
Cost per tonne to purchase 
Price per tonne as Scrap
 Nickel 56,115 7,800
 Hast C276 42,446 5,900
Titanium 12,950 1,800
Avesta Smo 13,600 1,900

Here’s an example of the value in this service;

  • A sheet of Avesta Smo 2000mm long x 1000m wide, 2mm thickness, weight 32.8kg costs approximately €420 and if half the sheet is used, an offcut of 1000 mm long X 1000mm wide remains.
  • The cost of this piece then was €210 yet the Scrap value of this offcut is just €30 (approx).
  • On Metaloffcut.com it may be possible to sell this Off Cut for in excess of €210 as the buyer would have to purchase a full sheet at €420 unless an offcut can be purchased.

MetalOffCut.com offers a better, more commercial solution

Once you post an Ad to either sell or request an OffCut, the details of this Ad are emailed to all those who sourced or requested similar sizes of that Material and Thickness.

So metaloffcut.com is proactive in broadcasting the offcut you are selling or seeking to purchase.

Membership packages are available as follows
Membership  Package
Duration Of Advert
Special Offer
Special Offer Until Dec 31st; Up to 100 ads 90 days €FREE
1 Ad Post a single advert straight away 90 days €10
90 Day Up to 250 Ads 90 days €175 
180 Day Up to 500 Ads 180 days €250
Up to 1,000 Ads 365 days €400
Platinum Up to 10,000 Ads, Annual Membership, Priority Ad Visibilbity & More 365 days Contact office

For those with a large number of Offcuts to buy or sell,

Call & Ask for our Metal Offcuts Dept +353 (0)51-358144 or Contact Us.

We look forward to partnering you in this exchange.